Site icon Learn MikuMikuDance – MMD Tutorials – Free 3D Animation Software

Running MikuMikuDance in Linux using Wine and DXVK

How do I run MMD on Linux? Does MikuMikuDance run on Linux? How do I run MMD using Wine on Linux? Can I use MME on Linux? How do I use DXVK with MMD? How do I run MMD on Ubuntu?

How to run MikuMikuDance in Linux using Wine and DXVK

Hey everyone, it is parkeerwacht here! It has been a while since I have written for the pages here at LearnMMD! But I am back with a special tutorial. How to run MMD in Linux! And “no”, not some alternate version of MMD: run the full 64-bit Windows version (9.32 as of this writing) including MME!

Ok, so a little story before we begin: Since I have always been interested in the technical aspect of MMD, and also computers in general, I like challenges! So I switched to Linux as my main operating system about a year ago, as of writing this. I have a problem however: I can no longer use MMD! MikuMikuDance only runs on Windows. Because I can play my Windows games using DirectX just fine, using Wine and DXVK, I thought could I do the same for MMD? And the answer is YES!

For this tutorial, I searched the internet and found multiple sources (I will cite these)… I combined them into this one guide for MMD specifically. Also I found a script on a Japanese website. I looked into its code and I did some testing. I wrote my own script based of that one. I also found a resource to do it manually. The script only automates things. ANYWAY enough rambling about… LET’S GET STARTED!!!

Also lets put some credit to the people who helped me with the information:

Without them I would not have been able to write this.

Now a little thing before we begin, I need to start with a disclaimer:

We are going to mess around with the Linux terminal. Make sure you know what you are doing! All the scripts I listed are provided “as is”. If for some reason they do not work, try to troubleshoot them yourself. This is due to the constant updates to wine, winetricks and DXVK. If it is completely broken let me know and I will update them. Use this tutorial and the scripts at your own risk. This guide only works for MMD+MME. It is not compatible with PMXe!

The following instructions are written for Ubuntu (and derived distro’s) IF you run something else follow the instructions for your distro instead. For my install script, I listed all the commands so you can follow them for your distro.

First of all check if your system is compatible with the requirements for MMD, Vulkan and DXVK


Here is a screenshot of my install:

Step 1 Setting up Vulkan.

Note: If you already got all the drivers and software installed to run Vulkan applications on your system you can skip this step.

What is Vulkan?

Vulkan is a graphical computing API much like DirectX and OpenGL etc. (very simplified) Now since Linux does not support DirectX, we need to find another way. Vulkan has less latency than OpenGL, and is generally more efficient. It is also compatible across multiple platforms.

1. Installing Drivers

Before we can use Vulkan we need to install some drivers first. PLEASE FOLLOW INSTRUCTIONS CAREFULLY!!!!!!!


We need to set up the system so it accepts x86 packages. Do this via:

sudo dpkg --add-architecture i386

For AMD cards

Make sure you are running either AMDVLK or AMDGPU-pro (DO NOT INSTALL BOTH)

I recommend using AMDVLK. I had the best experiences with this driver. The AMDGPU-pro package from AMD tends to break some games/applications using Vulkan. I have not tested AMDGPU-pro drivers , only AMDVLK.

Follow the instructions on this page under install with pre-build driver:

For Nvidia cards

see instructions below for installing Vulkan dependencies

2. Installing Vulkan dependencies

To install Vulkan on your system I highly suggest following the steps on this page for your version of Ubuntu (or other distro) and GPU.

here is the link:

Step 2 Installing Wine

NOTE: If you already have the latest wine-staging version on your system you can skip this step.

What is Wine?

Wine stands for Wine Is Not an Emulator. It is a compatibility layer that is able to run Windows programs on other operating systems, like Linux and macOS. This has a huge performance boost compared to running a virtual machine. It translates all the Windows API calls on the fly so Linux can understand these. This saves a lot of memory usage and performance hits. Plus you can integrate Windows applications in your desktop environment [source]

We need this program so we can run Windows programs on Linux. MMD is a Windows only program.

Installing Wine

We need to install Wine-staging (latest version) to be able to run MMD with DXVK.

Note: If you already got the latest version of wine-staging installed, you can skip this step. If you have a different variant of Wine installed, uninstall it and reinstall with wine-staging


Before you setup anything, run this command if you haven’t done so already:

sudo dpg --add-architecture i386


You need to set up FAudio first. This package is not in Ubuntu’s package manager but it is a dependency for Wine. To install follow these commands:



sudo dpkg -i libfaudio0_19.07-0~bionic_*.deb

If you get an error saying missing dependencies, enter the following command:

sudo apt -f install

Now go to the next part

Setting up wine

Follow the instructions on this page:


Now you have Wine installed

You can test it by typing the following command

wine --version

Step 3 Setting up Japanese locale.

We need to set up Japanese locale on the system to make sure MMD runs properly. This also allows you to unzip your models and such (due to them being zipped in the Japanese language format). We need to install the Japanese language pack for this

To install this you enter the following command.

sudo apt install language-pack-ja

Unzip script

For all your models, accessories, effects, motion data etc. you need to use this script to unpack it.

This will preserve all the original Japanese filenames etc. and this is important for your models and effects, for example.

Most archive formats are supported!

Dependencies for the script:

p7zip-full p7zip-rar convmv

to install them run this command:

sudo apt install p7zip-full p7zip-rar convmv

once these are installed you go to your MMD folder in a terminal and run the following commands:

tar -xf linux-unzip-tool.tar.gz
chmod +x

instructions on how to use will appear on screen once you run it.

Run the file using:


Step 4 Setting up Winetricks


To use Winetricks we need to set up a few dependencies first.

These packages are aria2 binutils, cabextract, fuseiso, p7zip-full, policykit-1, unrar, unzip, xdg-utils, xz-utils and zenity

install them with the following:

sudo apt install aria2 binutils cabextract fuseiso p7zip-full policykit-1 unrar unzip xdg-utils xz-utils zenity

My autoinstall script will setup winetricks for us.

Step 5 setting up MMD

UPDATE 29-08-2021: I have updated the script after doing some research. The script now also installs all the fonts needed for MMD. (Thanks to INFINITY)
UPDATE 23-04-2022: After doing further research I have patched the install script. It will now correctly install quartz.dll & Updated DXVK version as well. (Thanks INFINITY)

Now we get to the MMD side of things.

For MMD we are gonna set up a special wineprefix named WineMMD64, this will be a hidden folder in the home directory.

I have found a script online that does everything that is needed for MMD to run automatically. (credit to Ginga8) This one is slightly outdated with the latest winetricks and ubuntu builds. I have modified it to work with the latest winetricks and setup DXVK for us.

Download and extract my scripts using the following commands.

CD <Path to your MMD folder>
tar -xf WineMMD64.tar.gz
chmod +x WineMMD64Setup

Now you can run it using the following command:

bash WineMMD64Setup

This might take a while depending on your internet speed.

If the installation fails you can delete the folders .WineMMD64 and mmdtemp in your home directory. and try again. (if you cannot see it, press ctrl+h to reveal hidden folders)

Sometimes Winetricks will fail downloading one of the required libraries. (you can try deleting the winetricks folder in /home/<username>/.cache this will have winetricks re-download all the files)

If the installation fails again, try to look for errors and search them online or ask in the comments below.

Step 6 download and set up MMD + MME

Once you have done the last step, we can finally download and set up MMD

You can download the latest versions from the Download page here on LearnMMD or the VPVP page (on the VPVP page, you want item 1.4) and the latest version of MME (v037 as of this writing).

chmod +x MikuMikuDance

Step 7 Launching MMD and doing final fixes

Now that everything is set up to go, get ready to run it for the first time!

If you got the script from the last step you can run it from the terminal.

Go to your MMD folder in a terminal window and run:

bash MikuMikuDance

Alternatively you can start MMD with:

LANG=ja_JP.UTF-8 WINEPREFIX=~/.WineMMD64 wine MikuMikuDance.exe

Once you are in MMD you will see a garbled mess. This is an issue that is not on MMD’s end, it has to do with how Wine renders the window (I think)

If you get the following message:

This means MME could not start due to an error. Now this can mean many things.

When this happens MMD will crash afterwards.

I experienced this error for a while, these are some things to look for to fix this:

Fixing MMD

Now here is where the multi monitor setup I mentioned at the start comes in handy.

To fix the issues we have do the following:

Here are some images: (Click on the images for the full size)

Here is how it looks on my system:

(Click image for full-size)


SO! here you go! Now you can run MikuMikuDance on Linux! Using Wine and DXVK we were able to set everything up.
My scripts will set up a special Wineprefix with all the required libraries installed. Have fun with MMD!

Known issues and notes

Nothing is perfect. What we are doing here is using a workaround, with several compatibility layers to run a Windows program on Linux. Like you have already seen, the render window of MMD is broken. You have to use separate screen to make it work. It is purely visual.

Some MME effects don’t like DXVK either. Although using DXVK has been able to make many effects like Raycast run much smoother. Yes Ray-MMD does run using this method. I haven’t tested many effects but most should run.

If you run into issues and you want to reinstall, Rename .WineMMD64 in your home directory to something else and re-run the script.

This guide does not work for PMXe! it required different libries setup

I want to know what does and doesn’t run, when it comes to models and effects. Put your experiences in the comments.


— — —

– _ — –

Exit mobile version